Safety helmets – a practical guide to selection and features
Safety helmets – a practical guide to selection and features
A safety helmet is an indispensable part of workwear on a construction site. It protects against falling objects, impacts and electrical hazards and can in many cases be the difference between a minor injury and a serious accident. However, with the wide range of helmets on the market, it can be a challenge to find the model that best suits your needs and work situation.
In this article, you will get an overview of the most important features, types and factors you should consider when choosing a safety helmet.
The article presents a selection of safety helmets that represent different types, features and price ranges. The purpose is to provide an overview of the market and help you understand which features may be relevant for your specific work. The information about the products is based on publicly available descriptions from manufacturers and retailers and is summarised to provide a clear and informative overview.
Factors to consider when buying a safety helmet
When choosing a safety helmet, it is important to take into account both comfort, level of protection and adjustment options. Here are some of the most important factors you should consider.
1. Comfort and fit
A helmet must fit well to provide optimal protection. Adjustable settings such as chin strap, sweatband and internal harness make it possible to adapt the helmet to the shape of the head. A poor fit can lead to discomfort and reduced safety.
2. Material and weight
Most modern safety helmets are made of ABS plastic or HDPE, which combine low weight with high strength. Lightweight models reduce strain during long-term use, while heavier models often provide extra protection against impact and heat.
3. Ventilation
Good ventilation is important, especially for physically demanding work or high temperatures. Helmets with ventilation holes or air channels help keep the head cool and reduce sweating.
4. Electrical insulation
If you work near electrical installations, you should choose a helmet that is approved for electrical insulation. These helmets are made without ventilation holes and protect against electric shock.
5. Accessories and compatibility
Many helmets can be equipped with visors, hearing protection, headlamps or neck protection. Make sure the helmet is compatible with the accessories you need so you get a complete solution that suits your work task.
6. Durability and expiry date
Safety helmets have a limited lifespan – typically 3–5 years depending on material and use. UV radiation, heat and chemicals can degrade the material over time, so it is important to check the expiry date and replace the helmet regularly.
Products in focus
The Milwaukee BOLT™200 is a safety helmet designed to provide both protection and comfort under demanding working conditions. The helmet is made with a Lexan™ shell, known for its high impact strength and resistance to shocks.
It is equipped with the BOLT™ system, which allows compatible accessories to be mounted in a simple and intuitive way. This gives the user flexibility to customise the helmet as needed, for example with a visor, headlamp or hearing protection.
The ventilated version comes with a fixed EN 12492-certified chin strap (red colour code), while both ventilated and unventilated models meet the EN 397 standard for industrial head protection. The helmet protects against extreme temperatures down to −40 °C, lateral deformation and electrical insulation (440 V a.c. for the unventilated model).
Inside, the helmet has a comfortable foam lining with crown padding that distributes pressure evenly and increases comfort during prolonged use. The sweatband and lining are breathable, washable and replaceable, contributing to good hygiene and long service life.
The helmet can be adjusted in size from 52 to 68 cm and is available in eight colours with a matte finish, so it can be adapted to both personal and company preferences.
- Lexan™ shell: Provides high impact strength and resistance to shocks.
- BOLT™ system: Enables easy mounting of compatible accessories.
- Ventilated design: Improves air circulation and comfort during use.
- Comfortable fit: Foam lining and crown padding ensure even pressure distribution.
- Certified safety: Meets EN 397:2012 and EN 12492:2012 standards.
- Adjustable size: Fits head sizes from 52 to 68 cm.
Pros and cons
- High protection against impact and deformation
- Compatible with a wide range of BOLT™ accessories
- Ventilated for better comfort in warm environments
- Replaceable and washable inner padding
- Certified for both industrial and climbing standards
- Ventilated model does not provide electrical insulation
- Accessories must be purchased separately for full functionality
Pros and cons
Pros
- High protection against impact and deformation
- Compatible with a wide range of BOLT™ accessories
- Ventilated for better comfort in warm environments
- Replaceable and washable inner padding
- Certified for both industrial and climbing standards
Cons
- Ventilated model does not provide electrical insulation
- Accessories must be purchased separately for full functionality
Pros
- High protection against impact and deformation
- Compatible with a wide range of BOLT™ accessories
- Ventilated for better comfort in warm environments
- Replaceable and washable inner padding
- Certified for both industrial and climbing standards
Cons
- Ventilated model does not provide electrical insulation
- Accessories must be purchased separately for full functionality
Specifications
- Manufacturer: Milwaukee
- Model: BOLT™200
- Colour: White
- Type: Ventilated safety helmet
- Material: Lexan™ shell
- Size: 52–68 cm
- Certifications: EN 397:2012, EN 12492:2012
- Chin strap: EN 12492-certified (red colour code)
- Temperature resistance: Down to −40 °C
- Electrical insulation: 440 V a.c. (unventilated model only)
- Item number (SKU): 4932478141
The JSP Evolite is a safety helmet designed to provide maximum comfort without compromising protection. Weighing under 300 grams, it is about 20% lighter than traditional safety helmets, reducing strain during extended use.
The helmet is made with a lightweight yet strong ABS shell that protects against impacts and blows. The internal insert can be adjusted in three heights, allowing the user to customise the fit individually. This makes the helmet suitable for different head sizes and working conditions.
The low weight and ergonomic design contribute to a comfortable experience, even during long working days. The JSP Evolite is developed in accordance with the EN 397 standard, which sets requirements for safety helmets for industrial use.
- Low weight: Under 300 grams – approximately 20% lighter than standard helmets.
- Adjustable fit: Insert with three height settings for optimal comfort.
- Robust construction: Made of lightweight and strong ABS material.
- Certified safety: Complies with the EN 397 industrial safety standard.
- Ergonomic design: Developed to provide comfort during prolonged use.
Pros and cons
- Very low weight, reducing fatigue during extended use
- Adjustable insert provides flexible fit
- Complies with EN 397 safety standard
- Robust ABS shell with good impact strength
- Accessories are only included if specified separately
- Design may vary depending on configuration
Pros and cons
Pros
- Very low weight, reducing fatigue during extended use
- Adjustable insert provides flexible fit
- Complies with EN 397 safety standard
- Robust ABS shell with good impact strength
Cons
- Accessories are only included if specified separately
- Design may vary depending on configuration
Pros
- Very low weight, reducing fatigue during extended use
- Adjustable insert provides flexible fit
- Complies with EN 397 safety standard
- Robust ABS shell with good impact strength
Cons
- Accessories are only included if specified separately
- Design may vary depending on configuration
Specifications
- Manufacturer: JSP
- Model: Evolite
- Product category: Safety helmet
- Material: ABS plastic
- Weight: Under 300 g
- Adjustability: Insert with three height settings
- Standard: EN 397
- SKU: 295200200
The REALWEAR MSA V-Gard is a safety helmet developed for use with RealWear HMT-1 and HMT-1Z1 head-mounted tablets. It provides head protection in industrial environments while being designed to support the mounting of RealWear devices.
The helmet is approved as intrinsically safe (IS approved) for use with the HMT-1Z1 in explosive areas, making it suitable for work in environments with high safety requirements, such as the oil and gas industry or chemical plants.
The design is based on MSA’s V-Gard series, known for its durable construction and ergonomic fit. The combination of RealWear compatibility and MSA’s safety standards makes it a practical choice for users working with hands-free technology in the field.
- Compatibility: Designed for RealWear HMT-1 and HMT-1Z1.
- Safety approval: Intrinsically safe (IS approved) for use in explosive environments.
- Robust construction: Built on MSA’s V-Gard series for reliable head protection.
- Ergonomic design: Developed for comfortable use over extended periods.
- Professional use: Suitable for industrial and technical work environments.
Pros and cons
- Compatible with RealWear HMT-1 and HMT-1Z1
- Approved for use in explosive environments
- Solid and well-known MSA V-Gard construction
- Suitable for professional work environments
- Primarily intended for use with RealWear devices, not as a standalone helmet
- May be more expensive than standard safety helmets without IS approval
Pros and cons
Pros
- Compatible with RealWear HMT-1 and HMT-1Z1
- Approved for use in explosive environments
- Solid and well-known MSA V-Gard construction
- Suitable for professional work environments
Cons
- Primarily intended for use with RealWear devices, not as a standalone helmet
- May be more expensive than standard safety helmets without IS approval
Pros
- Compatible with RealWear HMT-1 and HMT-1Z1
- Approved for use in explosive environments
- Solid and well-known MSA V-Gard construction
- Suitable for professional work environments
Cons
- Primarily intended for use with RealWear devices, not as a standalone helmet
- May be more expensive than standard safety helmets without IS approval
Specifications
- Manufacturer: RealWear
- Model: 171056
- Item number: 3069620
- EAN: 0641817003572
- Product type: Safety helmet
- Compatibility: RealWear HMT-1 and HMT-1Z1
- Safety approval: Intrinsically safe (IS approved)
The Zekler Zone Safety Helmet is designed to provide high comfort and safety in both industrial and height work situations. It is equipped with integrated click mounts, allowing quick attachment of accessories such as headlamps, hearing protection, visors and neck protection without the use of screws or adapters.
The helmet has twelve ventilation holes that ensure good air circulation and a comfortable working environment, even during prolonged use. The headband can be adjusted in height and adapted to different head shapes, and the knob adjustment makes it easy to find the right fit within the size range 53–63 cm (XS–XXL).
Zekler Zone comes with two interchangeable 4-point chin straps, allowing the user to choose between the EN 397 standard for construction/industry and EN 12492 for climbing. Colour-coded buckles and labels make it clear which standard is in use.
The outer shell is made of lightweight polypropylene, while the inner shell consists of EPP material, which combines low weight with high impact resistance. The internal padding is absorbent, washable and replaceable, contributing to long-lasting comfort and hygiene.
The helmet can also be equipped with reflective sets and replaceable lamp clips, and the total weight is 419 grams. It meets the requirements of both EN 397 and EN 12492.
- Dual certifications: Approved for both construction/industry (EN 397) and climbing (EN 12492).
- Integrated click mounts: Makes it easy to attach accessories without tools.
- Effective ventilation: Twelve air holes ensure good airflow.
- Adjustable headband: Fits head sizes from 53 to 63 cm.
- Lightweight: Only 419 grams for high comfort during use.
Pros and cons
- Can be used for both industrial and climbing work
- Lightweight construction with good ventilation
- Easy attachment of accessories via click mounts
- Replaceable and washable padding
- Adjustable fit with knob adjustment
- Accessories such as visors and hearing protection must be purchased separately
- Colour markings and buckles require attention for correct standard use
Pros and cons
Pros
- Can be used for both industrial and climbing work
- Lightweight construction with good ventilation
- Easy attachment of accessories via click mounts
- Replaceable and washable padding
- Adjustable fit with knob adjustment
Cons
- Accessories such as visors and hearing protection must be purchased separately
- Colour markings and buckles require attention for correct standard use
Pros
- Can be used for both industrial and climbing work
- Lightweight construction with good ventilation
- Easy attachment of accessories via click mounts
- Replaceable and washable padding
- Adjustable fit with knob adjustment
Cons
- Accessories such as visors and hearing protection must be purchased separately
- Colour markings and buckles require attention for correct standard use
Specifications
- Brand: Zekler
- Model: Zone
- Colour: Red
- Item number (SKU): ZEKLERZONE
- Certifications: EN 397 (construction/industry), EN 12492 (climbing helmet)
- Material, outer shell: Polypropylene
- Material, inner shell: EPP (expanded polypropylene)
- Weight: 419 g
- Size: XS–XXL (53–63 cm)
- Ventilation: 12 air holes
- Chin straps: Two interchangeable 4-point straps (EN 397 / EN 12492)
The Uvex pheos B-WR is a safety helmet developed for professional use in environments where head protection is required. It is manufactured with a focus on both safety and comfort and has a modern design that makes it suitable for daily use in the workplace.
The helmet is ventilated to ensure good air circulation and has an adjustable 3D suspension strap system that provides a stable and comfortable fit. The long brim protects against sun and rain, while the helmet’s construction provides protection against molten metal.
The Uvex pheos B-WR can be used in several industries, including road work, water and wastewater sectors, pipe construction, and the metal industry. It is compatible with the Uvex pheos visor system, making it possible to add extra protection as needed.
The helmet meets the requirements of the EN 397 standard and covers head circumferences from 52 to 61 cm. It comes in a yellow colour, ensuring high visibility in the workplace.
- Ventilated design: Provides better comfort during extended use.
- Adjustable fit: 3D suspension strap system ensures individual adjustment.
- Long brim: Protects against sun and rain.
- Compatible with visor system: Can be expanded with the Uvex pheos visor system for extra protection.
- EN 397 certified: Meets European safety standards for industrial safety helmets.
Pros and cons
- Ventilated for increased comfort
- Adjustable fit with 3D strap system
- Compatible with visor system
- Suitable for multiple industrial applications
- Meets EN 397 standard
- The product has been discontinued and may be difficult to find in stock
- The colour selection may be limited to yellow
Pros and cons
Pros
- Ventilated for increased comfort
- Adjustable fit with 3D strap system
- Compatible with visor system
- Suitable for multiple industrial applications
- Meets EN 397 standard
Cons
- The product has been discontinued and may be difficult to find in stock
- The colour selection may be limited to yellow
Pros
- Ventilated for increased comfort
- Adjustable fit with 3D strap system
- Compatible with visor system
- Suitable for multiple industrial applications
- Meets EN 397 standard
Cons
- The product has been discontinued and may be difficult to find in stock
- The colour selection may be limited to yellow
Specifications
- Manufacturer: Uvex
- Model: 9772130
- EAN: 4031101510262
- Product type: Safety helmet
- Recommended industries: Road work, water, wastewater, pipe construction, metal industry
- Protection against: Molten metal
- Head circumference: 52 - 61 cm
- Colour: Yellow
- Features: Ventilated, adjustable width, long brim, uvex pheos visor system, 3D suspension strap system
- Compliance standards: EN 397
- Item number: 3085912
The AL-KO Oregon Safety Helmet with Earmuffs and Visor is a combined safety helmet designed to protect the user while working in the garden or forest. It integrates three important protective components – helmet, earmuffs, and visor – into one complete product.
The helmet protects the head from impacts and falling objects, while the attached earmuffs reduce noise levels from motorised equipment such as chainsaws and brush cutters. The mounted visor serves as facial protection against branches, wood chips, and other particles.
The construction is developed with a focus on safety and comfort, allowing the user to work efficiently and safely for extended periods. The combination of multiple protective functions makes it suitable for both professional and private users who want a complete solution for outdoor work.
- 3-in-1 protection: Helmet, earmuffs, and visor in one product.
- Effective noise reduction: Integrated earmuffs dampen noise from motorised equipment.
- Face protection: Visor protects against branches, wood chips, and flying particles.
- Comfortable fit: Designed for prolonged use in garden and forestry work.
- Robust construction: Built to withstand demanding outdoor conditions.
Pros and cons
- Combines multiple safety functions in one product
- Reduces the need for separate protective equipment
- Suitable for work with chainsaws and brush cutters
- Easy to put on and take off
- May feel heavier than a regular helmet without accessories
- The visor may require cleaning to maintain clear visibility
Pros and cons
Pros
- Combines multiple safety functions in one product
- Reduces the need for separate protective equipment
- Suitable for work with chainsaws and brush cutters
- Easy to put on and take off
Cons
- May feel heavier than a regular helmet without accessories
- The visor may require cleaning to maintain clear visibility
Pros
- Combines multiple safety functions in one product
- Reduces the need for separate protective equipment
- Suitable for work with chainsaws and brush cutters
- Easy to put on and take off
Cons
- May feel heavier than a regular helmet without accessories
- The visor may require cleaning to maintain clear visibility
Specifications
- Manufacturer: AL-KO
- Model: 1658208
- EAN: 5400182979876
- Item number: 2572706
- Product type: Safety helmet with earmuffs and visor
Product descriptions
The Milwaukee BOLT™200 is a safety helmet designed to provide both protection and comfort under demanding working conditions. The helmet is made with a Lexan™ shell, known for its high impact strength and resistance to shocks.
It is equipped with the BOLT™ system, which allows compatible accessories to be mounted in a simple and intuitive way. This gives the user flexibility to customise the helmet as needed, for example with a visor, headlamp or hearing protection.
The ventilated version comes with a fixed EN 12492-certified chin strap (red colour code), while both ventilated and unventilated models meet the EN 397 standard for industrial head protection. The helmet protects against extreme temperatures down to −40 °C, lateral deformation and electrical insulation (440 V a.c. for the unventilated model).
Inside, the helmet has a comfortable foam lining with crown padding that distributes pressure evenly and increases comfort during prolonged use. The sweatband and lining are breathable, washable and replaceable, contributing to good hygiene and long service life.
The helmet can be adjusted in size from 52 to 68 cm and is available in eight colours with a matte finish, so it can be adapted to both personal and company preferences.
- Lexan™ shell: Provides high impact strength and resistance to shocks.
- BOLT™ system: Enables easy mounting of compatible accessories.
- Ventilated design: Improves air circulation and comfort during use.
- Comfortable fit: Foam lining and crown padding ensure even pressure distribution.
- Certified safety: Meets EN 397:2012 and EN 12492:2012 standards.
- Adjustable size: Fits head sizes from 52 to 68 cm.
Pros and cons
- High protection against impact and deformation
- Compatible with a wide range of BOLT™ accessories
- Ventilated for better comfort in warm environments
- Replaceable and washable inner padding
- Certified for both industrial and climbing standards
- Ventilated model does not provide electrical insulation
- Accessories must be purchased separately for full functionality
Pros and cons
Pros
- High protection against impact and deformation
- Compatible with a wide range of BOLT™ accessories
- Ventilated for better comfort in warm environments
- Replaceable and washable inner padding
- Certified for both industrial and climbing standards
Cons
- Ventilated model does not provide electrical insulation
- Accessories must be purchased separately for full functionality
Pros
- High protection against impact and deformation
- Compatible with a wide range of BOLT™ accessories
- Ventilated for better comfort in warm environments
- Replaceable and washable inner padding
- Certified for both industrial and climbing standards
Cons
- Ventilated model does not provide electrical insulation
- Accessories must be purchased separately for full functionality
Specifications
- Manufacturer: Milwaukee
- Model: BOLT™200
- Colour: White
- Type: Ventilated safety helmet
- Material: Lexan™ shell
- Size: 52–68 cm
- Certifications: EN 397:2012, EN 12492:2012
- Chin strap: EN 12492-certified (red colour code)
- Temperature resistance: Down to −40 °C
- Electrical insulation: 440 V a.c. (unventilated model only)
- Item number (SKU): 4932478141
The JSP Evolite is a safety helmet designed to provide maximum comfort without compromising protection. Weighing under 300 grams, it is about 20% lighter than traditional safety helmets, reducing strain during extended use.
The helmet is made with a lightweight yet strong ABS shell that protects against impacts and blows. The internal insert can be adjusted in three heights, allowing the user to customise the fit individually. This makes the helmet suitable for different head sizes and working conditions.
The low weight and ergonomic design contribute to a comfortable experience, even during long working days. The JSP Evolite is developed in accordance with the EN 397 standard, which sets requirements for safety helmets for industrial use.
- Low weight: Under 300 grams – approximately 20% lighter than standard helmets.
- Adjustable fit: Insert with three height settings for optimal comfort.
- Robust construction: Made of lightweight and strong ABS material.
- Certified safety: Complies with the EN 397 industrial safety standard.
- Ergonomic design: Developed to provide comfort during prolonged use.
Pros and cons
- Very low weight, reducing fatigue during extended use
- Adjustable insert provides flexible fit
- Complies with EN 397 safety standard
- Robust ABS shell with good impact strength
- Accessories are only included if specified separately
- Design may vary depending on configuration
Pros and cons
Pros
- Very low weight, reducing fatigue during extended use
- Adjustable insert provides flexible fit
- Complies with EN 397 safety standard
- Robust ABS shell with good impact strength
Cons
- Accessories are only included if specified separately
- Design may vary depending on configuration
Pros
- Very low weight, reducing fatigue during extended use
- Adjustable insert provides flexible fit
- Complies with EN 397 safety standard
- Robust ABS shell with good impact strength
Cons
- Accessories are only included if specified separately
- Design may vary depending on configuration
Specifications
- Manufacturer: JSP
- Model: Evolite
- Product category: Safety helmet
- Material: ABS plastic
- Weight: Under 300 g
- Adjustability: Insert with three height settings
- Standard: EN 397
- SKU: 295200200
The REALWEAR MSA V-Gard is a safety helmet developed for use with RealWear HMT-1 and HMT-1Z1 head-mounted tablets. It provides head protection in industrial environments while being designed to support the mounting of RealWear devices.
The helmet is approved as intrinsically safe (IS approved) for use with the HMT-1Z1 in explosive areas, making it suitable for work in environments with high safety requirements, such as the oil and gas industry or chemical plants.
The design is based on MSA’s V-Gard series, known for its durable construction and ergonomic fit. The combination of RealWear compatibility and MSA’s safety standards makes it a practical choice for users working with hands-free technology in the field.
- Compatibility: Designed for RealWear HMT-1 and HMT-1Z1.
- Safety approval: Intrinsically safe (IS approved) for use in explosive environments.
- Robust construction: Built on MSA’s V-Gard series for reliable head protection.
- Ergonomic design: Developed for comfortable use over extended periods.
- Professional use: Suitable for industrial and technical work environments.
Pros and cons
- Compatible with RealWear HMT-1 and HMT-1Z1
- Approved for use in explosive environments
- Solid and well-known MSA V-Gard construction
- Suitable for professional work environments
- Primarily intended for use with RealWear devices, not as a standalone helmet
- May be more expensive than standard safety helmets without IS approval
Pros and cons
Pros
- Compatible with RealWear HMT-1 and HMT-1Z1
- Approved for use in explosive environments
- Solid and well-known MSA V-Gard construction
- Suitable for professional work environments
Cons
- Primarily intended for use with RealWear devices, not as a standalone helmet
- May be more expensive than standard safety helmets without IS approval
Pros
- Compatible with RealWear HMT-1 and HMT-1Z1
- Approved for use in explosive environments
- Solid and well-known MSA V-Gard construction
- Suitable for professional work environments
Cons
- Primarily intended for use with RealWear devices, not as a standalone helmet
- May be more expensive than standard safety helmets without IS approval
Specifications
- Manufacturer: RealWear
- Model: 171056
- Item number: 3069620
- EAN: 0641817003572
- Product type: Safety helmet
- Compatibility: RealWear HMT-1 and HMT-1Z1
- Safety approval: Intrinsically safe (IS approved)
The Zekler Zone Safety Helmet is designed to provide high comfort and safety in both industrial and height work situations. It is equipped with integrated click mounts, allowing quick attachment of accessories such as headlamps, hearing protection, visors and neck protection without the use of screws or adapters.
The helmet has twelve ventilation holes that ensure good air circulation and a comfortable working environment, even during prolonged use. The headband can be adjusted in height and adapted to different head shapes, and the knob adjustment makes it easy to find the right fit within the size range 53–63 cm (XS–XXL).
Zekler Zone comes with two interchangeable 4-point chin straps, allowing the user to choose between the EN 397 standard for construction/industry and EN 12492 for climbing. Colour-coded buckles and labels make it clear which standard is in use.
The outer shell is made of lightweight polypropylene, while the inner shell consists of EPP material, which combines low weight with high impact resistance. The internal padding is absorbent, washable and replaceable, contributing to long-lasting comfort and hygiene.
The helmet can also be equipped with reflective sets and replaceable lamp clips, and the total weight is 419 grams. It meets the requirements of both EN 397 and EN 12492.
- Dual certifications: Approved for both construction/industry (EN 397) and climbing (EN 12492).
- Integrated click mounts: Makes it easy to attach accessories without tools.
- Effective ventilation: Twelve air holes ensure good airflow.
- Adjustable headband: Fits head sizes from 53 to 63 cm.
- Lightweight: Only 419 grams for high comfort during use.
Pros and cons
- Can be used for both industrial and climbing work
- Lightweight construction with good ventilation
- Easy attachment of accessories via click mounts
- Replaceable and washable padding
- Adjustable fit with knob adjustment
- Accessories such as visors and hearing protection must be purchased separately
- Colour markings and buckles require attention for correct standard use
Pros and cons
Pros
- Can be used for both industrial and climbing work
- Lightweight construction with good ventilation
- Easy attachment of accessories via click mounts
- Replaceable and washable padding
- Adjustable fit with knob adjustment
Cons
- Accessories such as visors and hearing protection must be purchased separately
- Colour markings and buckles require attention for correct standard use
Pros
- Can be used for both industrial and climbing work
- Lightweight construction with good ventilation
- Easy attachment of accessories via click mounts
- Replaceable and washable padding
- Adjustable fit with knob adjustment
Cons
- Accessories such as visors and hearing protection must be purchased separately
- Colour markings and buckles require attention for correct standard use
Specifications
- Brand: Zekler
- Model: Zone
- Colour: Red
- Item number (SKU): ZEKLERZONE
- Certifications: EN 397 (construction/industry), EN 12492 (climbing helmet)
- Material, outer shell: Polypropylene
- Material, inner shell: EPP (expanded polypropylene)
- Weight: 419 g
- Size: XS–XXL (53–63 cm)
- Ventilation: 12 air holes
- Chin straps: Two interchangeable 4-point straps (EN 397 / EN 12492)
The Uvex pheos B-WR is a safety helmet developed for professional use in environments where head protection is required. It is manufactured with a focus on both safety and comfort and has a modern design that makes it suitable for daily use in the workplace.
The helmet is ventilated to ensure good air circulation and has an adjustable 3D suspension strap system that provides a stable and comfortable fit. The long brim protects against sun and rain, while the helmet’s construction provides protection against molten metal.
The Uvex pheos B-WR can be used in several industries, including road work, water and wastewater sectors, pipe construction, and the metal industry. It is compatible with the Uvex pheos visor system, making it possible to add extra protection as needed.
The helmet meets the requirements of the EN 397 standard and covers head circumferences from 52 to 61 cm. It comes in a yellow colour, ensuring high visibility in the workplace.
- Ventilated design: Provides better comfort during extended use.
- Adjustable fit: 3D suspension strap system ensures individual adjustment.
- Long brim: Protects against sun and rain.
- Compatible with visor system: Can be expanded with the Uvex pheos visor system for extra protection.
- EN 397 certified: Meets European safety standards for industrial safety helmets.
Pros and cons
- Ventilated for increased comfort
- Adjustable fit with 3D strap system
- Compatible with visor system
- Suitable for multiple industrial applications
- Meets EN 397 standard
- The product has been discontinued and may be difficult to find in stock
- The colour selection may be limited to yellow
Pros and cons
Pros
- Ventilated for increased comfort
- Adjustable fit with 3D strap system
- Compatible with visor system
- Suitable for multiple industrial applications
- Meets EN 397 standard
Cons
- The product has been discontinued and may be difficult to find in stock
- The colour selection may be limited to yellow
Pros
- Ventilated for increased comfort
- Adjustable fit with 3D strap system
- Compatible with visor system
- Suitable for multiple industrial applications
- Meets EN 397 standard
Cons
- The product has been discontinued and may be difficult to find in stock
- The colour selection may be limited to yellow
Specifications
- Manufacturer: Uvex
- Model: 9772130
- EAN: 4031101510262
- Product type: Safety helmet
- Recommended industries: Road work, water, wastewater, pipe construction, metal industry
- Protection against: Molten metal
- Head circumference: 52 - 61 cm
- Colour: Yellow
- Features: Ventilated, adjustable width, long brim, uvex pheos visor system, 3D suspension strap system
- Compliance standards: EN 397
- Item number: 3085912
The AL-KO Oregon Safety Helmet with Earmuffs and Visor is a combined safety helmet designed to protect the user while working in the garden or forest. It integrates three important protective components – helmet, earmuffs, and visor – into one complete product.
The helmet protects the head from impacts and falling objects, while the attached earmuffs reduce noise levels from motorised equipment such as chainsaws and brush cutters. The mounted visor serves as facial protection against branches, wood chips, and other particles.
The construction is developed with a focus on safety and comfort, allowing the user to work efficiently and safely for extended periods. The combination of multiple protective functions makes it suitable for both professional and private users who want a complete solution for outdoor work.
- 3-in-1 protection: Helmet, earmuffs, and visor in one product.
- Effective noise reduction: Integrated earmuffs dampen noise from motorised equipment.
- Face protection: Visor protects against branches, wood chips, and flying particles.
- Comfortable fit: Designed for prolonged use in garden and forestry work.
- Robust construction: Built to withstand demanding outdoor conditions.
Pros and cons
- Combines multiple safety functions in one product
- Reduces the need for separate protective equipment
- Suitable for work with chainsaws and brush cutters
- Easy to put on and take off
- May feel heavier than a regular helmet without accessories
- The visor may require cleaning to maintain clear visibility
Pros and cons
Pros
- Combines multiple safety functions in one product
- Reduces the need for separate protective equipment
- Suitable for work with chainsaws and brush cutters
- Easy to put on and take off
Cons
- May feel heavier than a regular helmet without accessories
- The visor may require cleaning to maintain clear visibility
Pros
- Combines multiple safety functions in one product
- Reduces the need for separate protective equipment
- Suitable for work with chainsaws and brush cutters
- Easy to put on and take off
Cons
- May feel heavier than a regular helmet without accessories
- The visor may require cleaning to maintain clear visibility
Specifications
- Manufacturer: AL-KO
- Model: 1658208
- EAN: 5400182979876
- Item number: 2572706
- Product type: Safety helmet with earmuffs and visor
Other products
The Milwaukee BOLT™ 100 is a safety helmet developed to provide both protection and flexibility in work situations. It is part of Milwaukee’s BOLT™ system, which allows a wide range of compatible accessories to be mounted via an intuitive attachment system.
The helmet is made of ABS plastic, providing low weight without compromising strength. It features a 6-point suspension system that distributes pressure evenly and increases comfort during extended use. The size can be easily adjusted with a wheel ratchet at the back, and the replaceable sweatband contributes to a comfortable fit.
The BOLT™ 100 is available in eight colours with a glossy finish, including white, yellow, orange, red, black, green, blue, and hi-vis yellow. It is certified according to EN 397:2012 and EN 50365:2002, meaning it meets requirements for both mechanical protection and electrical insulation in relevant versions.
The helmet is suitable for use in environments with high safety demands and where there is a need to adapt the equipment to different work tasks.
- BOLT™ system: Allows mounting of a wide range of compatible accessories.
- Lightweight construction: Made of ABS for low weight and high strength.
- Comfortable fit: 6-point suspension and adjustable wheel ratchet at the back.
- Replaceable sweatband: Increases hygiene and comfort during extended use.
- Certified safety: Meets EN 397:2012 and EN 50365:2002 standards.
Pros and cons
- Compatible with a wide range of BOLT™ accessories
- Lightweight and comfortable
- Easy size adjustment with wheel ratchet
- Available in multiple colours
- Certified for both mechanical and electrical protection
- Accessories must be purchased separately
- Electrical insulation applies only to the unventilated version
Pros and cons
Pros
- Compatible with a wide range of BOLT™ accessories
- Lightweight and comfortable
- Easy size adjustment with wheel ratchet
- Available in multiple colours
- Certified for both mechanical and electrical protection
Cons
- Accessories must be purchased separately
- Electrical insulation applies only to the unventilated version
Pros
- Compatible with a wide range of BOLT™ accessories
- Lightweight and comfortable
- Easy size adjustment with wheel ratchet
- Available in multiple colours
- Certified for both mechanical and electrical protection
Cons
- Accessories must be purchased separately
- Electrical insulation applies only to the unventilated version
Specifications
- Manufacturer: Milwaukee
- Model: BOLT™ 100
- Item number (SKU): 4932498723
- Material: ABS plastic
- Suspension: 6-point system
- Size: 52–68 cm
- Colours: White, yellow, orange, red, black, green, blue, hi-vis yellow
- Certifications: EN 397:2012, EN 50365:2002 (Electrical class 0)
- Electrical insulation: Up to 1000V AC / 1500V DC (unventilated version)
The Milwaukee Safety Helmet BOLT™ 100 is designed for professional users who need reliable and comfortable head protection. The helmet is equipped with the patented BOLT™ system, which makes it possible to attach a wide range of compatible accessories in a simple and secure way.
The shell is made of ABS plastic, providing low weight without compromising strength. The internal 6-point suspension contributes to an even distribution of pressure and increased comfort during extended use. The size can be easily adjusted with a wheel ratchet at the back, ensuring the helmet sits securely and comfortably.
A replaceable sweatband ensures better hygiene and comfort, and the helmet is available in eight different colours with a glossy finish, including white, yellow, orange, red, black, green, blue, and hi-vis yellow.
The BOLT™ 100 is certified according to EN 397:2012 and EN 50365:2002, meaning it meets requirements for protection against mechanical impacts, extreme temperatures, and electrical insulation. It can be used in both ventilated and unventilated versions depending on the needs of the work environment.
- BOLT™ system: Allows compatible accessories to be mounted quickly and securely.
- Lightweight: ABS shell reduces strain during extended use.
- Comfortable fit: 6-point suspension and adjustable wheel ratchet at the back.
- Replaceable sweatband: Improves hygiene and comfort.
- Certified safety: Meets EN 397:2012 and EN 50365:2002 standards.
Pros and cons
- Compatible with a wide range of accessories via the BOLT™ system
- Lightweight and comfortable to wear for extended periods
- Easy adjustment of fit with wheel ratchet
- Available in multiple colours for visibility and identification
- Meets relevant safety standards
- Accessories must be purchased separately
- The ventilated version does not provide electrical insulation under EN 397
Pros and cons
Pros
- Compatible with a wide range of accessories via the BOLT™ system
- Lightweight and comfortable to wear for extended periods
- Easy adjustment of fit with wheel ratchet
- Available in multiple colours for visibility and identification
- Meets relevant safety standards
Cons
- Accessories must be purchased separately
- The ventilated version does not provide electrical insulation under EN 397
Pros
- Compatible with a wide range of accessories via the BOLT™ system
- Lightweight and comfortable to wear for extended periods
- Easy adjustment of fit with wheel ratchet
- Available in multiple colours for visibility and identification
- Meets relevant safety standards
Cons
- Accessories must be purchased separately
- The ventilated version does not provide electrical insulation under EN 397
Specifications
- Manufacturer: Milwaukee
- Model: BOLT™ 100
- Item number (SKU): 4932498730
- Material: ABS plastic
- Suspension: 6-point
- Size: 52–68 cm
- Colours: White, yellow, orange, red, black, green, blue, hi-vis yellow
- Certifications: EN 397:2012, EN 50365:2002 (Electrical class 0)
- Electrical insulation: 440 V a.c. (unventilated version only)
- Temperature resistance: Down to -30°C
Different types of safety helmets
Safety helmets come in several variants, each designed for different work environments and risks.
1. Standard construction helmets
The classic helmet used on most construction sites protects against falling objects and impacts. It typically has a hard shell, internal harness and adjustable chin strap.
2. Electrician helmets
These helmets are made without ventilation holes to prevent electrical conduction. They are tested and approved for work near electrical installations.
3. Industrial safety helmets
Industrial models are often more robust and may be equipped with extra protection against heat, chemicals or molten metal. They are typically used in heavy industry and manufacturing.
4. Lightweight and bump caps
For work in low-risk environments, where the main danger is bumping your head against fixed objects, a bump cap may be sufficient. It looks like a cap but has a built-in protective shell.
5. Helmets with integrated visor
These models combine head and face protection in one solution. They are practical for work involving grinding, cutting or welding, where there is a risk of sparks and particles.
Different brands of safety helmets
There are many manufacturers of safety helmets, each with their own strengths and areas of specialisation.
3M
3M is known for high quality and innovative solutions in hearing protection, respiratory protection and head protection. Their helmets combine comfort, low weight and compatibility with various accessories.
Petzl
Petzl produces helmets with a focus on ergonomics and safety, especially for work at height and rescue operations. Many models have advanced adjustment systems and good ventilation.
JSP
JSP offers a wide range of helmets for both construction and industry. The brand is known for robust design, good fit and high user-friendliness.
Kask
Kask is an Italian brand that specialises in lightweight and comfort-oriented helmets. They are popular among tradespeople who work many hours a day wearing a helmet.
uvex
uvex combines German quality with modern design and produces helmets that meet high safety standards. Many models have integrated ventilation and the option to add visors and hearing protection.
Frequently asked questions
How long does a safety helmet last?
Most helmets have a lifespan of 3–5 years, depending on use and storage. Always check the expiry date and replace the helmet if it shows signs of cracks, discolouration or deformation.
How do you clean a safety helmet?
Clean the helmet with mild soap and lukewarm water. Avoid solvents or strong chemicals, as they can weaken the material. Dry the helmet thoroughly before using it again.
Should you wear a helmet even for short tasks?
Yes, even short tasks can involve a risk of head injury. It only takes a few seconds to put on the helmet, but it can prevent serious accidents.
How do I know if my helmet fits correctly?
A properly fitted helmet sits securely without pressing uncomfortably. Adjust the chin strap and harness so the helmet does not slip when you move your head.
Can you use a helmet with both visor and hearing protection?
Yes, many modern helmets are designed to be combined with both visors and hearing protection. However, it is important to ensure that the accessories are compatible with the specific helmet model.
Læs også:
